QUANPHAM
STRAIGHT AND ANGLED GUY BOLTS
5/8' X 8' STRAIGHT GUY BOLT
Item code: QP-FGB
Part Numbers
| Part # | Description |
|---|---|
| 5804 | 5/8' X 8' STRAIGHT GUY BOLT |
| 5805 | 5/8' X 10' STRAIGHT GUY BOLT |
| 5806 | 5/8' X 12' STRAIGHT GUY BOLT |
| 5807 | 5/8' X 14' STRAIGHT GUY BOLT |
| 5808 | 5/8' X 16' STRAIGHT GUY BOLT |
| 5809 | 5/8' X 18' STRAIGHT GUY BOLT |
| 5812 | 3/4' X 16' STRAIGHT GUY BOLT |
| 5813 | 3/4' X 14' STRAIGHT GUY BOLT |
| 5814 | 3/4' X 12' STRAIGHT GUY BOLT |
| 5815 | 3/4' X 16' ANGLED GUY BOLT |
| 5816 | 3/4' X 18' ANGLED GUY BOLT |
| 5817 | 3/4' X 20' ANGLED GUY BOLT |
| 5818 | 3/4' X 22' ANGLED GUY BOLT |
| 5824 | 3/4' X 10' ANGLED GUY BOLT |
| 5825 | 3/4' X 12' ANGLED GUY BOLT |
| 5826 | 3/4' X 14' ANGLED GUY BOLT |
| 5831 | 5/8' X 8' ANGLED GUY BOLT |
| 5832 | 5/8' X 10' ANGLED GUY BOLT |
| 5834 | 5/8' X 12' ANGLED GUY BOLT |
| 5836 | 5/8' X 14' ANGLED GUY BOLT |
| 5838 | 5/8' X 16' ANGLED GUY BOLT |
| 5839 | 5/8' X 18' ANGLED GUY BOLT |
| 5840 | 1' X 12' ANGLED GUY BOLT |
| 5841 | 1' X 14' ANGLED GUY BOLT |
| 5842 | 1' X 16' ANGLED GUY BOLT |
| 5843 | 1' X 18' ANGLED GUY BOLT |
| 5852 | 5/8' X 20' STRAIGHT GUY BOLT |
| 5853 | 5/8' X 22' ANGLED GUY BOLT |
| 5857 | 3/4' X 10' STRAIGHT GUY BOLT |
| 5858 | 3/4' X 18' STRAIGHT GUY BOLT |
| 5859 | 3/4' X 20' STRAIGHT GUY BOLT |
| 5860 | 5/8' X 20' ANGLED GUY BOLT |
Overview
- Used for dead-ending and attaching guy wires to poles and crossarms.
- Manufacture’s marking (ABI) appears on unthreaded section of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.
- QUANPHAM marking (ABI) appears on each bolt.
- Supplied with cone point to ease assembly with nut.
- Supplied with an attached square nut.
- Hot dip galvanized to meet ASTM Specifications F2329.
- Minimum thread length is 4′.
- Recommended torque value: 73 ft lb.
- Minimum Tensile Strength: 13,550 lbf.
